VAT

5.0M CAT6A SFTP PL YW EC

Product Code: NPP6ASZDB-YW005M

Price
£17.19 ex. VAT £20.63 inc. VAT

Available In 3-7 Days


Add To Favourites

Features and Benefits

  • High-performance patch cords exceeding industry standards supporting NETCONNECT channel specifications
  • Standardized transparent, slim-line boots provides consistent patch cord appearance and supports highest density applications
  • Colored clips are available to fit the transparent boot, eliminating the need of multiple colors for matching every jacket color
  • Colored pull latch tabs are available for easier plug release handling from the modular jack

Specifications

Product classification

Regional Availability

Asia | Australia/New Zealand | EMEA

Portfolio

NETCONNECT®

Product Type

Twisted pair patch cord

Product Series

NPP

Ordering Note

Cords > 1 m are authorized for use in channels and are an effective standalone method used to connect active devices

General Specifications

ANSI/TIA Category

6A

Cable Type

S/FTP (shielded)

Conductor Type

Stranded

Interface, Connector A

RJ45 plug

Interface Feature, connector A

Standard

Interface, Connector B

RJ45 plug

Interface Feature, connector B

Standard

Jacket Color

Black | Blue | Green | Orange | Red | Slate/Gray | White | Yellow | Purple/Violet

Pairs, quantity

4

Transmission Standards

ANSI/TIA-568.2-D | ISO/IEC 11801 Class EA

Wiring

T568B

Dimensions

Cable Assembly Length Range (m)

1 – 30

Cable Assembly Length Range (ft)

2 – 100

Cable Assembly Length Range (cm)

50 – 999

Cable Assembly Length Range (in)

24 – 999

Diameter Over Jacket

5.84 mm | 0.23 in

Compatible Conductor Gauge, stranded

26 AWG

Wiring Diagram

Electrical Specifications

Contact Resistance, maximum

20 mOhm

Current Rating at Temperature

1.5 A @ 20 °C | 1.5 A @ 68 °F

dc Resistance, maximum

0.3 ohm

Dielectric Withstand Voltage, RMS, contact-to-contact

1,000 Vac @ 60 Hz

Insulation Resistance, minimum

500 MOhm

Remote Powering

Fully supports the safe delivery of power over LAN cabling described by IEEE 802.3bt (Type 4) and complies with the unmating under electrical load requirements prescribed by IEC 60512-99-002

PoE Durability

Supports IEEE 802.3bt Type 4 (90 W) applications greater than 3000 plug to jack mating cycles

Safety Voltage Rating

300 V

 

Material Specifications

Conductor Material

Bare copper

Contact Plating Material

Gold over nickel

Plug Contact Material

Phosphor Bronze

Plug Housing Material

Polycarbonate clear

Jacket Material

Low Smoke Zero Halogen (LSZH)

Mechanical Specifications

Plug Retention Force, minimum

50 N | 11.24 lbf

Plug to Jack Mating Cycles

Complies to IEC 60603-7 series

Environmental Specifications

Operating Temperature

-20 °C to +60 °C (-4 °F to +140 °F)

Storage Temperature

-40 °C to +70 °C (-40 °F to +158 °F)

Environmental Space

Low Smoke Zero Halogen (LSZH)

Flammability Rating

UL 94 V-0

Safety Standard

ETL | cETL | Anatel

Packaging and Weights

Packaging Material

Eco-friendly, single-use plastics-free

Packaging quantity

1

Regulatory Compliance/Certifications

Agency

Classification

CHINA-ROHS

Below maximum concentration value

ISO 9001:2015

Designed, manufactured and/or distributed under this quality management system

RCM 

Compliant to electrical safety & telecommunications requirements

REACH-SVHC

Compliant as per SVHC revision on www.commscope.com/ProductCompliance

ROHS

Compliant

UK-ROHS

Compliant

CAT CAT6A
UK Mainland Order by 2pm for Next Day Delivery*
Under £25.00 £4.50
Over £25.00 FREE

UK Highlands & Islands Order by 2pm for Next Day Delivery*
Under £80.00 £15.00
Over £80.00 FREE