Purchase an eligible* Fluke Versiv kit and get a second Versiv Mainframe and FiberInspector Pro Camera FREE

 

 

 

PURCHASE THIS...

 



Versiv Kit

The Versiv™ family accelerates every step of the certification process. The future ready Versiv™ platform supports modules for fibre testing (loss and OTDR) and ethernet troubleshooting and is easily upgradable to support future standards. 

Troubleshoot faults faster with the Taptive™ user interface which graphically displays the source of failures including crosstalk, return loss and shield faults.  Analyse test results and create professional test reports using LinkWare™ reporting software.

*Eligible Versiv Kits: DSX-8000-PRO/GLD, DSX-8000-PRO, DSX-8000Qi/GLD, DSX-8000Qi, DSX-8000QOi/GLD, DSX-8000QOi, DSX-5000Qi/GLD, DSX-5000Qi, OFP-CFP-Mi, OFP-CFP-Si, OFP-CFP-Qi, CFP-100-S, CFP-100-Mi, CFP-100-Si, CFP-100-M, CFP-100-Q, CFP-100-Qi

 

 

...GET THESE FREE

 

 

 

 

Another Versiv Mainframe

With a second Versiv Mainframe your team can do twice as much with their Versiv System:

- With all eligible configurations execute Basic/Tier 1 fibre certification and inspect fibre end faces at both ends of the link without moving the tester to the far end. 

If you purchase a DSX-5000Q0i you can certify copper cabling and perform OTDR testing at the same time, whilst also being able to perform Basic/Tier 1 fibre certification and simultaneously have the ability to either Extended/Tier 2 certify links or troubleshoot failed links with the OTDR.

 



FiberInspector Pro Camera

The FI-7000 FiberInspector Pro enables you to quickly inspect and certify fibre end-faces inside ports or patch cords. It’s 2-second automated PASS/FAIL certification eliminates human subjectivity and enables anyone to become a fibre inspection expert.

- Automated Pass/Fail acceptance testing of fiber end-faces

- Graphical indication of problem areas due to contamination, pits, chips, and scratches

- Large touchscreen for pinch and zoom

- Certify to industry standards - IEC 61300-3-35

- No more confusion about whether the fiber is good or bad

- Eliminate human subjectivity from end-face measurements

- Save end-face views during certification process

- Reduce fibre inspection time with 2-second grading

- ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completedcorrectly

- Taptive™ user interface simplifies set-up, and eliminates error

- Analyze test results and create professional test reports using LinkWare™ management software

Fluke Double-Up Promotion is valid from 1st February - 1st July 2017.

 

For more information about this great promotion,

contact our Sales Team on 01252 379 379.